YASKAWA VS-606V7 Series - Reducing Motor Noise or Leakage Current Using Carrier Frequency Selection (n080)

82
Peripheral devices must be connected according to the fol-
lowing load conditions when using pulse monitor output.
The machine might damage when the conditions are not satis-
fied.
Used as a Sourcing Output
Used as a Sinking Input
Output Voltage
VRL (V)
Load Impedance
(kΩ)
+5 V 1.5 kΩ or more
+8 V 3.5 kΩ or more
+10 V 10 kΩ or more
External Power
Supply (V)
+12 VDC ±5 %
or less
Sinking Current
(mA)
16 mA or less
NOTE
VRL
AM
AC (0 V)
Load
Impedance
Sink Current
AM
AC (0 V)
(0 V)
External Power Supply
Load
Impedance