Yealink CTP20 User Manual

| Basic Settings | 121
2. Configure and save the following settings:
Parameter Description Configuration Method
Daylight Saving Time
Configure the type of DST.
The available types are as
below:
• Disabled: do not use DST.
• Enabled-use DST. You can
manually configure the start
time, the end time and the
offset according to your
needs.
• Automatic-use DST. DST will
be configured automatically.
You do not need to manually
configure the start time,
the end time and the offset
according to your needs.
Default: Auto.
Web user interface
Endpoint
CTP20/CTP18
Fixed Type
Specify the DST calculation
methods.
The available DST calculation
methods are as below:
• By Date- specifies the
month, day and hour to be
the DST start/end date.
• By Week- specifies the
month, week, day and hour
the DST start/end date.
Note: It only works when you
enable Daylight Saving Time.
Web user interface
Start Date
When you select By Date as the
fixed type, configure the start
time of DST.
Note: It only works when you
enable Daylight Saving Time.
Web user interface
End Date
When you select By Date as
the fixed type, configure the end
time of DST.
Note: It only works when you
enable Daylight Saving Time.
Web user interface

Yealink CTP20 Specifications

General

Aspect ratio	16:9
Screen shape	Flat
Display diagonal	13.3 \
Touch technology	Multi-touch
Touchscreen type	Multi-user
Touchscreen technology	Capacitive
Number of simultaneous touchpoints	10
Product color	Black
Power consumption (typical)	7 W
Ethernet LAN (RJ-45) ports	1
OmniTapps Multitouch compatibility	No
Wi-Fi standards	Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (without stand)	196 mm
Width (without stand)	321.5 mm
Height (without stand)	118 mm