EasyManuals Logo

Yealink CTP20 User Manual

Yealink CTP20
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
| Configuring Camera Settings | 199
2. Configure and save the following settings:
Parameter Description Configuration Method
Continuous Auto Focus
Enable or disable this feature.
Default: On.
Web user interface
Endpoint
CTP20/CTP18
Setting the Camera Presets
Presets are the pre-saved settings of both the angle and the focal length for the camera. The camera
presets can help you quickly point a camera at pre-defined locations. The camera presets can remain in
effect until you change them. Only the second generation VCS devices and third generation MeetingEye
600 supports using camera presets on the web user interface, the touch panel, and CP960.
About this task
After enabling the tracking mode feature, you cannot use the camera presets. If you want to use the
camera preset, disable the tracking mode feature.
Procedure
1.
On your web user interface, go to Home > Yourself > .
2. If there are multiple cameras connected, click the camera name area in the top-left corner and select
the desired camera from the drop-down menu.
3. Click any number to configure the camera presets.
You can add, modify, and delete the preset.
Note: For more information about configuring presets via CP960 conference phone or CTP20/
CTP18, refer to the Yealink Full HD Video Conferencing System User Guide.
Configuring Preset Synchronize With Active Camera
The preset synchronize with active camera feature is applicable to VC880/VC800/PVT980 connected to
the multi-camera VCC22 Be default, if multiple camera presets are set for the endpoint, after selecting

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink CTP20 and is the answer not in the manual?

Yealink CTP20 Specifications

General IconGeneral
Aspect ratio16:9
Screen shapeFlat
Display diagonal13.3 \
Touch technologyMulti-touch
Touchscreen typeMulti-user
Touchscreen technologyCapacitive
Number of simultaneous touchpoints10
Product colorBlack
Power consumption (typical)7 W
Ethernet LAN (RJ-45) ports1
OmniTapps Multitouch compatibilityNo
Wi-Fi standardsWi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)196 mm
Width (without stand)321.5 mm
Height (without stand)118 mm

Related product manuals