Yealink CTP20 User Manual

| Configuring Call Settings | 213
Parameter Description Configuration Method
External
Enable or disable to display the external
contact list.
Note: It is enabled by default. It can be
configured only when logging in to a YMS or
Yealink Cloud account.
Web user interface
Local directory
Enable or disable to display the local contact
list.
Default: On.
Web user interface
Conference Contacts
Enable or disable to display the conference
contact list.
Default: On.
Web user interface
LDAP
Enable or disable to display the LDAP list.
Note: It is enabled by default.
Web user interface
Tab Default Configure the list of contacts that is displayed
by default when you enter the contact
interface.
Note: If you have logged in to a YMS or a
Yealink Cloud account, the default value is
Enterprise. Otherwise, the default value is
Local.
Web user interface
Configuring the Feature of Invitation Before Meeting
By default, you can directly initiate a Meet Now conference without any participants on third generation
VCS devices. If you want to invite participants before initiating a conference, you can enable is this feature.
Procedure
1. On your web user interface, go to Setting > Call Features > In-Call Settings.
2. Configure and save the following settings:
Parameter Description Configuration Method
Invitation Before Meeting
Enable or disable this feature.
Default: Off.
Web user interface

Yealink CTP20 Specifications

General

Aspect ratio	16:9
Screen shape	Flat
Display diagonal	13.3 \
Touch technology	Multi-touch
Touchscreen type	Multi-user
Touchscreen technology	Capacitive
Number of simultaneous touchpoints	10
Product color	Black
Power consumption (typical)	7 W
Ethernet LAN (RJ-45) ports	1
OmniTapps Multitouch compatibility	No
Wi-Fi standards	Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (without stand)	196 mm
Width (without stand)	321.5 mm
Height (without stand)	118 mm