| Configuring Camera Settings | 185
Enabling People Counting for Third Generation VCS Devices
Through face detection, the third generation VCS devices can count up to 30 participants. When the
conference ends, you can view the maximum number of participants, the conference type, the conference
start and end time on the web user interface. You can export the conference record to your PC.
Procedure
1. On your web user interface, go to Setting > Advanced Features > People Counting.
2. Configure and save the following settings:
Parameter Description Configuration Method
Enable People Counting
Enable or disable the people
counting feature.
• On
• Off
Default: Disabled.
Web user interface
Save Quantity(strip) Configure the number of
conference records displayed
on the web user interface. When
you reach the limit you set, the
newly added conference record
will cover the oldest record.
• 50
• 100
• 200
• 500
• 1000
Note: this configuration appears
only when you enable People
Counting. The default value is
50.
Web user interface
Tip: When the call ends, click Data Output in the Conference Record field to export the
conference record to your PC.
Controlling the Camera
You can pan, tilt and zoom your own camera. This feature is not applicable to VP59.
Procedure
1. Do one of the following:
•
On your web user interface, go to Home > Yourself > .
• On your VCS, go to More > Camera Control.
• On your CP960 conference phone, tap Camera.
•
On your CTP20/CTP18, tap .
2. Use the navigation keys to adjust the camera angle.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
