| Configuring Virtual Meeting Room | 206
Parameter Description Configuration Method
Virtual Meeting Room 1 >
Password
Configure the password for
virtual meeting room 1.
Valid Value: 1 to 10, default
value: 6.
Web user interface
Virtual Meeting Room 2 >
Meeting Password
Enable or disable the system to
configure a password for virtual
meeting room 2.
Note: the default value is Off.
Only when the meeting room
type is VMR mode can this
parameter be configured.
Web user interface
Virtual Meeting Room
2Password
Configure the password for
virtual meeting room 2.
Valid Value: 1 to 10, default
value: blank.
Only when the meeting room
type is VMR mode can this
parameter be configured.
Web user interface
Note: If you set a password for the virtual conference room, the remote party can not call in
when using other account.
Joining the VMR
If the virtual meeting room requires no password, dial IP address or account to enter the VMR.
If the virtual meeting room requires a password, only dial IP##meeting password or meeting
password@IP to enter the VMR.
Example:
• The IP address of the moderator is 10.3.6.201.
• The meeting password for virtual meeting room 1 is 123.
• The meeting password for virtual meeting room 2 is 456.
Participants can dial 10.3.6.201##123 or 123@10.3.6.201 to enter the virtual meeting room 1.
Participants can dial 10.3.6.201##456 or 456@10.3.6.201 to enter the virtual meeting room 2.
Without a meeting password or with a wrong meeting password, the call will fail.
Configuring the Third-party Virtual Meeting Room
A Virtual Meeting Room (VMR) is an online space, typically hosted by a Cloud-service provider, where
multiple participants can join. Participants usually join by dialing a specific number or an address with
a simple name like zoomcrc.com. You can configure a third-party VMR (Zoom/BlueJeans/Pexip/Videxio
Platform) in advance, so that you can quickly join a VMR without registering a third-party Cloud account.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
