EasyManuals Logo

Yealink SIP-T46S Administrator's Guide

Yealink SIP-T46S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #404 background imageLoading...
Page #404 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
401
Values
1-On, incoming calls are forwarded to the destination number (configured by the parameter “for-
ward.busy.target”) when the callee is busy.
Default
0
Web UI
Features > Forward&DND > Forward > Busy Forward > On/Off
Phone UI
Menu > Features > Call Forward > Busy Forward > Busy Forward
Parameter
forward.busy.target <y0000000000xx>.cfg
Description
It configures the destination number of the busy forward on a phone basis.
Note: It works only if “features.fwd.allow is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Busy Forward > Target
Phone UI
Menu > Features > Call Forward > Busy Forward > Forward to
Parameter
forward.busy.on_code <y0000000000xx>.cfg
Description
It configures the busy forward on code to activate the server-side busy forward feature.
The phone will send the busy forward on code and the pre-configured destination number (configured
by the parameter “forward.busy.target”) to the server when you activate the busy forward feature on a
phone basis.
Note: It works only if “features.fwd.allow is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Busy Forward > On Code
Phone UI
Menu > Features > Call Forward > Busy Forward > On Code
Parameter
forward.busy.off_code <y0000000000xx>.cfg
Description
It configures the busy forward off code to deactivate the server-side busy forward feature.
The phone will send the busy forward off code to the server when you deactivate the busy forward fea-
ture on a phone basis.
Note: It works only if “features.fwd.allow is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Busy Forward > Off Code
Phone UI
Menu > Features > Call Forward > Busy Forward > Off Code
Parameter
forward.no_answer.enable <y0000000000xx>.cfg
Description
It triggers the no answer forward feature to on or off on a phone basis.
Note: It works only if “features.fwd.allow is set to 1 (Enabled) and “features.fwd_mode” is set to 0

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals