Yealink SIP-T46S Administrator's Guide

Call Features
402
(Phone) (except T19(P) E2/CP920 phones). DND activated on the IP phone deactivates the local No
Answer Forward settings.
Permitted
Values
0-Off
1-On, incoming calls are forwarded to the destination number (configured by the parameter “for-
ward.no_answer.target”) after a period of ring time.
Default
0
Web UI
Features > Forward&DND > Forward > No Answer Forward > On/Off
Phone UI
Menu > Features > Call Forward > No Answer Forward > No Answer Forward
Parameter
forward.no_answer.target <y0000000000xx>.cfg
Description
It configures the destination number of the no answer forward on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > No Answer Forward > Target
Phone UI
Menu > Features > Call Forward > No Answer Forward > Forward to
Parameter
forward.no_answer.timeout <y0000000000xx>.cfg
Description
It configures ring times (N) to wait before forwarding incoming calls.
The incoming calls will be forwarded when not answered after N*M (M is configurable by “phone_set-
ting.ring_duration”) seconds.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
Integer from 0 to 20 (determined by “features.forward.no_answer.show_ring_times”)
Default
2
Web UI
Features > Forward&DND > Forward > No Answer Forward > After Ring Time (0~120s)
Phone UI
Menu > Features > Call Forward > No Answer Forward > After Ring Time
Parameter
features.forward.no_answer.show_ring_times <y0000000000xx>.cfg
Description
It configures the permitted values of the ring times (N) to wait before forwarding incoming calls.
Example:
features.forward.no_answer.show_ring_times = 0,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
Note: It works only if “forward.no_answer.enable” or “account.X.timeout_fwd.enable” is set to 1
(Enabled).
Permitted
Values
String within 512 characters
Default
0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20 (1 is not applicable to BroadSoft users)
Parameter
phone_setting.ring_duration <y0000000000xx>.cfg
Description
It configures the interval (in seconds) of the ring for the no answer forward feature.
Note: It works only if “forward.no_answer.enable” or “account.X.timeout_fwd.enable” is set to 1

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm