User Guide for SIP-T58V/A Smart Media Phone
276
The touch screen prompts the following:
2. Wait for the designated period of time or tap OK to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
Call Completion
You can use call completion to notify the caller who failed to reach a desired party when the
party becomes available to receive a call.
To enable call completion via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Call Completion.
3. Tap the On radio box in the Call Completion field.
4. Tap to accept the change or to cancel.
Call completion is configurable via web user interface at the path Features->General
Information.
To Next Page
Loading...
Need help?
General
