Basic Phone Features
267
your IP phone.
You can update the following video settings on your phone:
- Stop Transmitting Video during a Call
- Change the Video Layout during Calls
- Preview the Near-Site Video
Stopping Transmitting Video during a Call
You can unplug the camera or swipe down from the top of the screen in the video call screen
and then tap Video to stop your phone from automatically transmitting your video during a
video call. However, you cannot turn off far-site video.
If you stop transmitting video, the icon will display on the near-site video, as shown below:
Your camera will not transmit video to your contact and the far site cannot see you.
Stopping transmitting video does not create an audio-only call. Even if you stop transmitting
video, you can see the other party, and the call is still a video call. To place an audio-only call,
contact your system administrator.
Changing the Video Layout during Calls
During video calls, near-site and far-site video images are displayed on the touch screen. You
can change the video layout.
The system supports three video layouts:
One large, other small: One video image displays in a large size, the other video images
along the right side of the screen displays in small sizes.
Full screen: One video image displays in full size, the other video images are hidden.
Same size: All video images display in the same size.
To Next Page
Loading...
Need help?
General
