Basic Phone Features
277
To use call completion:
When the called party is busy, the following prompt will appear on the touch screen of the
phone:
1. Tap OK, the phone will then return to the idle screen and call completion will be activated.
When the called party becomes idle, the touch screen prompts the following:
1. Tap OK to redial the number.
Note
Recall
You can tap a recall key to place a call back to the last incoming call.
To configure a recall key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
Call completion is not available on all servers. For more information, contact your system
administrator.
To Next Page
Loading...
