Getting Started
35
displays “Welcome Initializing…Please wait” during the initialization.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4 network
settings (e.g., IP address, subnet mask, default gateway address and DNS address) by default.
Note
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T58V/A smart media phone
supports up to 16 accounts. If your phone is not registered, you may have to register it. For
more information on how to register your phone, refer to Account Management on page 165.
Using the Touch Screen
Idle Screen
The SIP-T58V/A smart media phone supports multiple idle screens. You can swipe left or right to
switch among different idle screens. The IP phone supports three idle screens by default.
You can add a new idle screen by moving an application or widget to the right side of the third
idle screen. The idle screen will be deleted automatically if there is no application or widget on
the screen. For more information, refer to Managing Applications and Widgets on page 177.
If your network does not use DHCP, proceed to Basic Network Settings on page 56.
To Next Page
Loading...
Need help?
General
