Yealink SIP-T58V User Manual

User Guide for SIP-T58V/A Smart Media Phone
366
Options
Description
Mail
for MWI service.
To use this feature, you should also configure the voice
mail number.
Note
To configure subscribe for MWI via web user interface
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Subscribe for MWI.
4. Enter the period time in the MWI Subscription Period(Seconds) field.
5. Click Confirm to accept the change.
The IP phone will subscribe to the account number for MWI service by default.
To enable subscribe MWI to voice mail via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Subscribe for MWI.
4. Select Enabled from the pull-down list of Subscribe MWI To Voice Mail.
The phone will send SUBSCRIBE messages for MWI service to the account or the voice number
MWI service depending on the server. Contact your system administrator for more information.

Yealink SIP-T58V Specifications

General

Resolution	800 x 480 pixels
USB Ports	2 x USB 2.0
SIP Accounts	16
HD Audio	Yes
Display	7-inch capacitive touchscreen
Video Resolution	720p
Operating System	Android
Wi-Fi	Yes
Bluetooth	Yes
Ethernet	10/100/1000 Mbps
PoE Support	Yes
Audio Codecs	G.711, G.722, G.729, iLBC
Voice Features	HD voice
Headset Support	Yes
Expandable	Yes
Supported Protocols	SIP, TLS, SRTP
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing