Yealink T58A

| Troubleshooting Methods | 106
Default 16
Web UI Settings > Configuration > Syslog > Syslog Facility
Parameter static.syslog.prepend_mac_address.enable <y0000000000xx>.cfg
Description It enables or disables the device to prepend the MAC address to the log messages
exported to the syslog server.
Permitted Values
0-Disabled
1-Enabled
Default 0
Web UI Settings > Configuration > Syslog > Syslog Prepend MAC
Viewing the Syslog Messages on Your Syslog Server
You can view the syslog file in the desired folder on the syslog server. The location of the folder may differ
from the syslog server. For more information, refer to the network resources.
The following figure shows a portion of the syslog:
Packets Capture
You can capture packet in two ways: capturing the packets via web user interface or using the Ethernet
software. You can analyze the captured packets for troubleshooting purposes.
• Capturing the Packets via Web User Interface
• Ethernet Software Capturing Configuration
Capturing the Packets via Web User Interface
For Yealink Teams devices, you can export the packets file to the local system and analyze it.
Yealink Teams devices support the following two modes for capturing the packets:
• Normal: Export the packets file after stopping capturing.
• Enhanced: Export the packets file while capturing.
• Capturing the Packets in Normal Way
• Capturing the Packets in Enhanced Way
Capturing the Packets in Normal Way