Yealink T58A

| Device Network | 25
Default 0
[1]
If you change this parameter, the device will reboot to make the change take effect.
Wi-Fi
Wi-Fi feature enables you to connect the devices to the organization’s wireless network.
Note: For T56A/T55A, make sure the Wi-Fi USB Dongle WF50 is connected to the device.
• Wi-Fi Configuration
Wi-Fi Configuration
The following table lists the parameters you can use to configure the Wi-Fi.
Parameter static.wifi.function.enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the Wi-Fi feature.
Permitted Values
0-Disabled
1-Enabled
Default 1
Parameter static.wifi.enable <y0000000000xx>.cfg
Description It activates or deactivates the Wi-Fi mode.
Note: It works only if “static.wifi.function.enable” is set to 1 (Enabled).
Permitted Values
0-Disabled
1-Enabled
Default 0
Web UI Network > Wi-Fi > Wi-Fi Active (or Wi-Fi)
Phone UI
> Settings > Device Settings > Wi-Fi > Wi-Fi
Parameter static.wifi.X.label
[2]
<y0000000000xx>.cfg
Description It configures the profile name of a specific wireless network.
Note: It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to
1 (Enabled).
Permitted Values String within 32 characters
Default Blank
Parameter static.wifi.X.ssid
[2]
<y0000000000xx>.cfg
Description It configures the SSID of a specific wireless network.
SSID is a unique identifier for accessing wireless access points.
Note: It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to
1 (Enabled).