Yealink T58A

| Device Provisioning | 41
Note: The provisioning priority mechanism takes effect only if
“static.auto_provision.custom.protect” is set to 1. For more information on this parameter, refer to
MAC-local CFG File Configuration .
Static parameters have no priority. They take effect no matter what method (web user interface or
phone user interface or configuration files) you are using for provisioning.
Static parameters are the parameters that start with a prefix “static.”, for example, the parameters
associated with auto provisioning/network/syslog and internal settings (the temporary configurations
to be used for program running).
Related information
Provisioning Devices on the Microsoft Teams & Skype for Business Admin Center
Manual Provisioning
This method enables you to perform configuration changes on a per-device basis.
• Web User Interface Access
• Phone User Interface
Web User Interface Access
When configuring the devices via the web user interface, you are required to have a user name and
password for access. For an administrator, the default user name and password are “admin” (case-
sensitive). For a user, the default user name and password are “user” (case-sensitive).
• Accessing the Web User Interface
• Web Server Type Configuration
• Importing CFG Configuration Files to Device
• Exporting CFG Configuration Files from Device
Accessing the Web User Interface
Procedure
1.
Navigate to > Settings > Device Settings > About.
2. Enter the device IP address in the address bar of a web browser on your PC.
For example, for IPv4: http://192.168.0.10 or 192.168.0.10; for IPv6: http://
[2005:1:1:1:215:65ff:fe64:6e0a] or [2005:1:1:1:215:65ff:fe64:6e0a]
3. Enter the user name and password.
4. Click Login.