| Security Features | 80
User and Administrator Identification
By default, some menu options are protected by the privilege levels: user and administrator, each with its
own password. You can also customize the access permission for configurations on the web user interface
and phone user interface. Yealink phones support the access levels of admin, var and user.
When logging into the web user interface or access the advanced settings on the device, as an
administrator, you need an administrator password to access various menu options. The default username
and password for administrator are “admin”. Both you and the user can log into the web user interface, and
you will see all of the user options. The default username and password for the user are “user”.
For security reasons, you should change the default user or administrator password as soon as possible.
Since the advanced menu options are strictly used by the administrator, users can configure them only if
they have administrator privileges.
• User and Administrator Identification Configuration
• User Access Level Configuration
User and Administrator Identification Configuration
The following table lists the parameters you can use to configure the user and administrator identification.
Parameter static.security.user_name.user <y0000000000xx>.cfg
Description It configures the user name of the user for the device’s web user interface access.
Permitted Values String within 32 characters
Default user
Parameter static.security.user_name.admin <y0000000000xx>.cfg
Description It configures the user name of the administrator for the device’s web user interface access.
Permitted Values String within 32 characters
Default admin
Parameter static.security.user_name.var <y0000000000xx>.cfg
Description
It configures the user name of the var for device’s web user interface access.
Note: It works only if “static.security.var_enable” is set to 1 (Enabled).
Permitted Values String within 32 characters
Default var
Parameter static.security.user_password <y0000000000xx>.cfg
To Next Page
Loading...
