Yealink T58A

| Device Network | 30
Parameter static.network.802_1x.identity
[1]
<y0000000000xx>.cfg
Description
It configures the user name for 802.1x authentication.
Note: It works only if “static.network.802_1x.mode” is set to 1, 2, 3, 4, 5, 6, or 7.
Permitted Values String within 32 characters
Default Blank
Web UI Network > Advanced > 802.1x > Identity
Phone UI
> Settings > Device Settings > Network(default password: admin) > 802.1x
> Identity
Parameter static.network.802_1x.md5_password
[1]
<y0000000000xx>.cfg
Description
It configures the password for 802.1x authentication.
Note: It works only if “static.network.802_1x.mode” is set to 1, 3, 4, 5, 6, or 7.
Permitted Values String within 32 characters
Default Blank
Web UI Network > Advanced > 802.1x > MD5 Password
Phone UI
> Settings > Device Settings > Network(default password: admin) > 802.1x
> MD5 Password
Parameter static.network.802_1x.root_cert_url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the CA certificate.
The format of the certificate must be *.pem, *.crt, *.cer or *.der.
Note: It works only if “static.network.802_1x.mode” is set to 2, 3, 4, 5, 6, or 7.
Permitted Values URL within 511 characters
Default Blank
Web UI Network > Advanced > 802.1x > CA Certificates
Parameter static.network.802_1x.client_cert_url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the device certificate.
The format of the certificate must be *.pem.
Note: It works only if “static.network.802_1x.mode” is set to 2 (EAP-TLS).
Permitted Values URL within 511 characters
Default Blank
Web UI Network > Advanced > 802.1x > Device Certificates
[1]
If you change this parameter, the device will reboot to make the change take effect.
Proxy Server
You can configure your network to use proxy servers.