Yealink T58A

| Device Customization | 71
Description
It configures the offset time (in minutes) of Daylight Saving Time (DST).
Note: It works only if “local_time.summer_time” is set to 1 (Enabled).
Permitted Values Integer from -300 to 300
Default Blank
Web UI Settings > Time&Date > Offset(minutes)
Parameter auto_dst.url <MAC>.cfg
Description
It configures the access URL of the DST file (AutoDST.xml).
Note: It works only if "local_time.summer_time" is set to 2 (Automatic).
Permitted Values
URL within 511 characters
Default Blank
Time and Date Manual Configuration
You can set the time and date manually when the devices cannot obtain the time and date from the NTP
time server.
The following table lists the parameter you can use to configure time and date manually.
Parameters local_time.manual_time_enable <MAC>.cfg
Description It enables or disables the device to obtain time and date from manual settings.
Permitted Values
0-Disabled (obtain time and date from NTP server)
1-Enabled (obtain time and date from manual settings)
Default 0
Web UI Settings > Time & Date > Manual Time
Phone UI
> Settings > Device Settings > Time & Date > General > Type > Manual
Settings
Time and Date Format Configuration
You can customize the time and date with a variety of time and date formats, including options to
date format with the day, month, or year, and time format in 12 hours or 24 hours, or you can also custom
the date
format as required.
The following table lists the parameters you can use to configure the time and date format.
Parameters local_time.time_format <MAC>.cfg
Description It configures the time format.