Yealink T58A - Page 70

| Device Customization | 70
Permitted Values
0-DST by Date
1-DST by Week
Default 0
Web UI Settings > Time & Date > Fixed Type
Parameter local_time.start_time <MAC>.cfg
Description
It configures the start time of the Daylight Saving Time (DST).
Note: It works only if the “local_time.summer_time” is set to 1 (Enabled).
Permitted Values
Month/Day/Hour-DST by Date, use the following mapping:
Month: 1=January, 2=February,…, 12=December
Day: 1=the first day in a month,…, 31= the last day in a month
Hour: 0=0am, 1=1am,…, 23=11pm
Month/Week of Month/Day of Week/Hour of Day- DST by Week, use the following
mapping:
Month: 1=January, 2=February,…, 12=December
Week of Month: 1=the first week in a month,…, 5=the last week in a month
Day of Week: 1=Monday, 2=Tuesday,…, 7=Sunday
Hour of Day: 0=0am, 1=1am,…, 23=11pm
Default 1/1/0
Web UI Settings > Time & Date > Start Date
Parameter local_time.end_time <MAC>.cfg
Description
It configures the end time of the Daylight Saving Time (DST).
Note: It works only if “local_time.summer_time” is set to 1 (Enabled).
Permitted Values
Month/Day/Hour-DST by Date, use the following mapping:
Month: 1=January, 2=February,…, 12=December
Day: 1=the first day in a month,…, 31= the last day in a month
Hour: 0=0am, 1=1am,…, 23=11pm
Month/Week of Month/Day of Week/Hour of Day- DST by Week, use the following
mapping:
Month: 1=January, 2=February,…, 12=December
Week of Month: 1=the first week in a month,…, 5=the last week in a month
Day of Week: 1=Monday, 2=Tuesday,…, 7=Sunday
Hour of Day: 0=0am, 1=1am,…, 23=11pm
Default 12/31/23
Web UI Settings > Time & Date > End Date
Parameter local_time.offset_time <MAC>.cfg