Yealink T58A

| Device Provisioning | 33
Parameter static.network.proxy.password
[1]
<y0000000000xx>.cfg
Description It configures the password for proxy server authentication.
Permitted Values
String within 256 characters
Default Blank
Web UI Network > Proxy > Proxy Password (only for wired network)
Phone UI
> Settings > Device Settings > Proxy (default password: admin) > Proxy
password
Parameter static.network.proxy.sip.enable <y0000000000xx>.cfg
Description It enables or disables all communications including SIP to use a proxy server.
Permitted Values
0-Disabled, SIP UDP and outbound do not use proxy server.
1-Enabled
Default 0
[1]
If you change this parameter, the device will reboot to make the change take effect.
Device Provisioning
This chapter provides basic instructions for setting up your devices with a provisioning server.
For more information, refer to Yealink_Teams_HD_IP_Phones_Auto_Provisioning_Guide.
• Provisioning Points to Consider
• Boot Files, Configuration Files, and Resource Files
• Provisioning Methods
• Setting Up a Provisioning Server
Provisioning Points to Consider
You can deploy your devices on the Microsoft Teams & Skype for Business Admin Center or using a
provisioning server.
• Provisioning devices on the Microsoft Teams & Skype for Business Admin Center, which allows you to
efficiently realize centralized management for devices within the enterprise.
• If there is a provisioning server on your environment, and you want to deploy a mass of devices, we
recommend you to use the central provisioning method as your primary configuration method. A
provisioning server maximizes the flexibility when you install, configure, upgrade and manage the
devices, and enables you to store the configuration on the server. You can set up a provisioning server
on the local area network (LAN) or anywhere on the Internet.
Related information
Provisioning Devices on the Microsoft Teams & Skype for Business Admin Center