Yealink T58A - Page 32

| Device Network | 32
Description It configures the host name or IP address that does not apply to the proxy server to
access.
Multiple host names or IP addresses are seperated by commas.
Note: It works only if "static.network.proxy.mode" is set to 1 (Enabled).
Permitted Values
URL within 511 characters
Default Blank
Web UI Network > Proxy > Bypass Proxy For (only for wired network)
Phone UI
> Settings > Device Settings > Proxy (default password: admin) > Bypass
proxy for
Parameter static.network.proxy.test_addres <y0000000000xx>.cfg
Description It configures the test URL for the proxy server.
After connecting to the proxy server, the phones try to send a network request to
the specified URL. If the URL cannot be accessed, the phone fails to connect to
the proxy server.
Note: It works only if "static.network.proxy.mode" is set to 1 (Enabled).
Permitted Values
URL within 511 characters
Default https://www.google.com
Web UI Network > Proxy > Domain Name For Testing (only for wired network)
Phone UI
> Settings > Device Settings > Proxy (default password: admin) > Proxy
domain name to test proxy configurations
Parameter static.network.proxy.enable <y0000000000xx>.cfg
Description It enables or disables the proxy server authentication.
Note: It works only if "static.network.proxy.mode" is set to 1 (Enabled).
Permitted Values
0-Disabled
1-Enabled
Default 0
Web UI Network > Proxy > Enable Athentication
Phone UI
(More) > Settings > Device Settings > Proxy (default password: admin) >
Enable authentication
Parameter static.network.proxy.username
[1]
<y0000000000xx>.cfg
Description It configures the username for proxy server authentication.
Permitted Values
String within 256 characters
Default Blank
Web UI Network > Proxy > Proxy Username (only for wired network)
Phone UI
> Settings > Device Settings > Proxy (default password: admin) > Proxy
username