Yealink T58A

| Device Customization | 60
• Screensaver Configuration
Screensaver Configuration
The following table lists the parameters you can use to configure the screensaver.
Parameter screensaver.wait_time <y0000000000xx>.cfg
Description It configures the time (in seconds) that the device waits in the idle state before the
screen saver starts.
Permitted
Values
30-30s
60-1min
300-5min
600-10min
900-15min
1800-30min
3600-1h
7200-2h
Default 900
Web UI Settings > Preference > Screensaver > Screensaver Wait Time
Phone UI
> Settings > Device Settings > Display > Screen saver > Screensaver Waiting
Time
For Common Area Phones: > Settings > Device Settings > Screen Saver
(default password: admin) > Screensaver Waiting Time
Parameter screensaver.type <y0000000000xx>.cfg
Description It configures the type of screen saver to display.