Yealink T58A

| Device Network | 31
• Proxy Server Configuration
Proxy Server Configuration
The following table lists the parameters you can use to configure the proxy server.
Parameter static.network.proxy.mode
[1]
<y0000000000xx>.cfg
Description It enables or disables the proxy server.
Permitted Values
0-Disabled
1-Enabled, you can manually configure the proxy server information.
Default 0
Web UI Network > Proxy > Proxy (only for wired network)
Phone UI
> Settings > Device Settings > Proxy (default password: admin) > Proxy
Parameter static.network.proxy.type <y0000000000xx>.cfg
Description It configures the proxy type.
Note: It works only if "static.network.proxy.mode" is set to 1 (Enabled).
Permitted Values
0-Socks5
1-HTTP CONNECT
Default 0
Parameter static.network.proxy.hostname <y0000000000xx>.cfg
Description It configures the IP address or domain name of the proxy server.
Note: It works only if "static.network.proxy.mode" is set to 1 (Enabled).
Permitted Values
String within 99 characters
Default Blank
Web UI Network > Proxy > Proxy Hostname (only for wired network)
Phone UI
> Settings > Device Settings > Proxy (default password: admin) > Proxy
hostname
Parameter static.network.proxy.port
[1]
<y0000000000xx>.cfg
Description It configures the port of the proxy server.
Note: It works only if "static.network.proxy.mode" is set to 1 (Enabled).
Permitted Values
Integer from 1 to 65535
Default Blank
Web UI Network > Proxy > Proxy Port (only for wired network)
Phone UI
> Settings > Device Settings > Proxy (default password: admin) > Proxy
port
Parameter static.network.proxy.bypass_address <y0000000000xx>.cfg