Yealink T58A

| Device Provisioning | 48
The provisioning server address can be IP address, domain name, or URL. If a user name and password
are specified as part of the provisioning server address, for example, http://user:pwd@server/dir, they will
be used only if the server supports them.
Note: A URL should contain forward slashes instead of back slashes and should not contain
spaces. Escape characters are not supported.
If a user name and password are not specified as part of the provisioning server address, the User
Name and Password of the provisioning server configured on the device will be used.
The following table lists the parameters you can use to configure static provision.
Parameter static.auto_provision.server.url <y0000000000xx>.cfg
Description It configures the access URL of the provisioning server.
Permitted Values URL within 511 characters
Default Blank
Web UI Settings > Auto Provision > Server URL
Parameter static.auto_provision.server.username <y0000000000xx>.cfg
Description It configures the user name for provisioning server access.
Permitted Values String within 32 characters
Default Blank
Web UI Settings > Auto Provision > Username
Parameter static.auto_provision.server.password <y0000000000xx>.cfg
Description It configures the password for provisioning server access.
Permitted Values String within 32 characters
Default Blank
Web UI Settings > Auto Provision > Password
Configuring a Provisioning Server
The provisioning server can be set up on the local LAN or anywhere on the Internet. Use the following
procedure as a recommendation if this is your first provisioning server setup.
Procedure
1. Install a provisioning server application or locate a suitable existing server, such as 3CDaemon.
2. Create an account and home directory.
3. Set security permissions for the account.
4. Create boot files and configuration files, and then edit them as desired.
5. Copy the boot files, configuration files, and resource files to the provisioning server.
6. If performing static provisioning, obtain the provisioning server address.
Tip: Typically, all devices are configured with the same server account, but the server account
provides a means of conveniently partitioning the configuration. Give each account a unique
home directory on the server and change the configuration on a per-line basis.