Yealink T58A - NTP Settings

| Device Customization | 65
Time
Zone
Time Zone Name Time
Zone
Time Zone Name
+1
Albania(Tirane), Austria(Vienna),
Belgium(Brussels),
Caicos, Chad, Croatia(Zagreb),
Czech Republic(Prague),
Denmark(Kopenhagen),
France(Paris), Germany(Berlin),
Hungary(Budapest), Italy(Rome),
Luxembourg(Luxembourg),
Macedonia(Skopje),
Namibia(Windhoek),
Netherlands(Amsterdam),
Spain(Madrid),
+12:45 New Zealand(Chatham Islands)
+2 Estonia(Tallinn), Finland(Helsinki),
Gaza Strip(Gaza), Greece(Athens),
Harare,Pretoria,Israel(Tel Aviv),
Jordan(Amman), Latvia(Riga),
Lebanon(Beirut), Moldova(Kishinev),
Romania(Bucharest),
Russia(Kaliningrad), Syria(Damascus),
Turkey(Ankara), Ukraine(Kyiv, Odessa)
+13 Tonga(Nukualofa)
+3 East Africa Time, Iraq(Baghdad),
Russia(Moscow)
+13:30 Chatham Islands
+3:30 Iran(Teheran) +14 Kiribati
+4 Armenia(Yerevan), Azerbaijan(Baku),
Georgia(Tbilisi)，Kazakhstan(Aktau),
Russia(Samara)
NTP Settings
You can set an NTP time server for the desired area as required. The NTP time server address can be
offered by the DHCP server or configured manually.
• NTP Configuration
NTP Configuration
The following table lists the parameters you can use to configure the NTP.
Parameter local_time.manual_ntp_srv_prior <MAC>.cfg
Description It configures the priority for the device to use the NTP server address offered by the
DHCP server.
Permitted
Values
0- High (use the NTP server address offered by the DHCP server preferentially)
1- Low (use the NTP server address configured manually preferentially)
Default 0
Web UI Settings > Time & Date > NTP By DHCP Priority
Parameter local_time.dhcp_time <MAC>.cfg