Yealink T58A - Page 26

| Device Network | 26
Permitted Values String within 32 characters
Default Blank
Parameter static.wifi.X.priority
[2]
<y0000000000xx>.cfg
Description It configures the priority for a specific wireless network.
5 is the highest priority, 1 is the lowest priority.
Note: It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to
1 (Enabled).
Permitted Values Integer from 1 to 5
Default 1
Parameter static.wifi.X.security_mode
[2]
<y0000000000xx>.cfg
Description It configures the security mode of a specific wireless network.
Note: It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to
1 (Enabled).
Permitted Values NONE, WEP, WPA/WPA2 PSK, 802.1x EAP
Default NONE
Parameter static.wifi.X.cipher_type
[2]
<y0000000000xx>.cfg
Description It configures the encryption type of a specific wireless network.
If "static.wifi.X.security_mode" is set to NONE, the permitted value of this
parameter is NONE.
If "static.wifi.X.security_mode" is set to 802.1x EAP, the permitted values of this
parameter are PEAP, TLS, TTLS, or PWD.
Note: It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to
1 (Enabled).
Permitted Values NONE, PEAP, TLS, TTLS, PWD
Default NONE
Parameter static.wifi.X.password
[2]
<y0000000000xx>.cfg
Description It configures the password of a specific wireless network.
Note: It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to
1 (Enabled).
Permitted Values String within 64 characters
Default Blank
Parameter static.wifi.X.eap_type
[2]
<y0000000000xx>.cfg
Description It configures the EAP authentication mode of a specific wireless network.
Note: It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to
1 (Enabled).
Permitted Values TTLS, PEAP or TLS
Default Blank