Yealink T58A - Page 94

| Hybrid Mode | 94
Description It configures the time interval (in seconds) for the phone to detect whether the working
outbound proxy server is available by sending the registration request after the fallback
server takes over call control.
Permitted Values Integer from 0 to 65535
Default 3600
Web UI Account > Register > Proxy Fallback Interval
Parameter account.X.sip_server.Y.address
[1][2]
<MAC>.cfg
Description It configures the IP address (or domain name) of the SIP server Y.
Permitted Values String within 256 characters
Default Blank
Web UI Account > Register > SIP Server Y > Server Host
Parameter account.X.sip_server.Y.port
[1][2]
<MAC>.cfg
Description It configures the port of the SIP server Y.
Permitted Values Integer from 0 to 65535
Default 5060
Web UI Account > Register > SIP Server Y > Port
Parameter account.X.sip_server.Y.expires
[1][2]
<MAC>.cfg
Description It configures the registration expiration time (in seconds) of SIP server Y.
Permitted Values Integer from 30 to 2147483647
Default 3600
Web UI Account > Register > SIP Server Y > Server Expires
Parameter account.X.sip_server.Y.retry_counts
[1][2]
<MAC>.cfg
Description It configures the retry times for the phone to resend requests when the SIP server Y is
unavailable or there is no response from the SIP server Y.
Permitted Values
Integer from 0 to 20
Default 3
Web UI Account > Register > SIP Server Y > Server Retry Counts
Parameter account.X.sip_server.Y.transport_type
[1][2]
<MAC>.cfg
Description It configures the type of transport protocol for a specific account.
Permitted Values
0-UDP
1-TCP
2-TLS
3-DNS-NAPTR, if no server port is given, the phone performs the DNS NAPTR and SRV
queries for the service type and port.
Default 0
Web UI Account > Register > SIP Server Y > Transport