Yealink VC400 - Page 221

Configuring System Settings
205
Parameter
Description
Configuration Method
will be reversed when pressing the
left and right navigation keys on the
remote control. In this case, you can
set the camera pan direction to
Reversed.
Multiple Preset
Enables or disables the multiple
preset feature.
Default: Off
For more information, refer to
Multiple Preset on page 206.
Web User Interface
Camera Map
Enables or disables the preview of
camera presets.
Default: On
Note: If it is set to on, you can view
the pre-saved camera presets.
Remote Control
Web User Interface
Clear Preset
Clears all camera presets.
Remote Control
Web User Interface
Reset Camera
Resets the camera settings to
factory defaults.
Note: The camera presets will also
be cleared.
Remote Control
Web User Interface
To configure camera settings via web user interface:
1. Click on Setting->Camera.