Yealink VC400 - Page 220

Administrator’s Guide for Yealink Video Conferencing Systems
204
Parameter
Description
Configuration Method
Contrast
Configures the contrast of the
camera.
Valid Values: 0-100
Default:
For VCC18 camera, the default value
is 45.
For VCC20 camera, the default value
is 7.
Remote Control
Web User Interface
Noise Reduction
(2D)
Specifies the noise reduction (2D)
mode.
 Off
 Low
 Middle
 High
Default: Middle
Remote Control
Web User Interface
Noise Reduction
(3D)
Specifies the noise reduction (3D)
mode of VCC18 camera.
 Off
 Low
 Middle
 High
Default: Off
Note: It is not applicable to VCC20
camera.
Remote Control
Web User Interface
Hangup Mode
Enables or disables the camera to
flip the image view when camera is
handed at up-side-down position
Default: Off
Remote Control
Web User Interface
Camera Pan
Direction
Configures the pan direction of the
camera.
 Normal
 Reversed
Default: Normal
If the camera reversed mode is
enabled, the camera pan direction
Remote Control
Web User Interface