8-8
IM CW240E
8.2.2 Manual Save
You can press the
SAVE
key during measurement to save measured data
(instantaneous values).
[ 1 Setting up the saving conditions
Set up necessary items on the Save screen. Save 1/2, Save 2/2, and Harm. Meas. Detail
screens
SEE ALSO
For more information on settings, see Section 6.4, Save Data Settings 1/2, and Sec-
tion 6.5, Save Data Settings 2/2.
[ 2 Displaying the Measure screen
The Measure screen is displayed.
This subsection describes the manual saving procedure taking the List
measurement screen as an example.
(Saving of measured data does not mean the saving of data displayed on
the screen, but that items set up on the Save screen will be saved.)
ENTER
ENTER
LIGHT
TOP
MENU
SAVE
A
RANGE
START
&STOP
ESC
ENTER
F
1
F
2
F
3
F
4
F
5
DISP COPY
RANGE
F
1
TOP
MENU
[ 3 Saving data
SAVE
Press the SAVE key.
Instantaneous values will be saved each time the SAVE key is pressed.
8.2 Saving Measured Data
To Next Page
Loading...
Need help?
General
