10-16
IM CW240E
10.3 Using a Printer
● Measurement/Measured Data Printout
1 To the Measure screen
The Measure screen is displayed.
The following paragraph describes the measured data-printing procedure
taking the Integrate screen as an example.
(Printout of measured data does not mean printing of the data displayed on
the screen, but that items set up on the Save screen are printed out.)
TOP
MENU
ENTER
ENTER
LIGHT
TOP
MENU
SAVE
A
RANGE
START
&STOP
ESC
ENTER
F
1
F
2
F
3
F
4
F
5
DISP COPY
RANGE
F1
2 Printing out data
START
&STOP
Press the START&STOP key.
This starts integration according to the setting of the integration start
method.
(There are cases where integration enters a standby state until it is
started.) Measured data is printed out on the printer at every interval time
(until integration ends).
Symbol flashes on the printer during printing.
(Measured data is also saved in the data save destination.)
To Next Page
Loading...
