2-63
IM 04L51B01-17EN
Commands and Responses
2
SUser
User Settings
Register users.
Syntax
SUser,p1,p2,p3,p4,p5,p6,p7
p1
User number
p2
User level
Off
Not Use
Admin
Administrator level
User
User level
p3
Login mode
(GX/GP: Key, Comm, Key+Comm)
(GM: Comm)
Key
Log in using touch operation
Comm
Log in via communication
(including Web)
Key+Comm
Log in using touch operation
and via communication.
P4
User name (up to 20 characters, ASCII)
p5
Password (up to 20 characters, ASCII)
p6
Enable or disable user limitation (Off, On)
p7
User limitation number (1 to 10)
Query
SUser[,p1]?
The password of p5 are displayed using
asterisks.
Example Register a user-level user to user number
3. Set the user name to “user10” and the
password to “pass012.” Allow login only using
touch operation, and specify user limitation
number 5.
SUser,3,User,Key,’user10’,’pass012
’,On,5
Description
• If p1=1, p2 is fixed to Admin. In addition, you cannot
set p3 to Comm on the GX/GP.
• If p2=Admin, p6 is fixed to Off.
• You cannot enter NULL or spaces in p4 or p5.
• For the characters that you can use in the specified
password (p5), see Appendix 1.
• You cannot use this command to configure settings
when logged in as a user (when the user level is
User).
When Using the Advanced Security Function (/AS)
Syntax
SUser,p1,p2,p3,p4,p5,p6,p7,p8,p9,p
10,p11
p1
User number
p2
User level
Off
Not use
Admin
Administrator level
User
User level
Monitor
Monitor level
p3
Login method
Key
Log in using touch operation
Comm
Log in via communication
commands (including Web)
Key+Comm
Log in using touch operation
and via communication.
P4
User name (up to 20 characters, ASCII)
p5
Password (between 6 and 20 characters,
ASCII)
p6
Enable or disable user limitation (Off, On)
p7
User limitation number (1 to 10)
p8
User ID (up to 20 characters, ASCII)
Specify a user ID and password
combination that have not been registered
in the past.
p9
Password expiration (Off, 1Month,
3Month, 6Month)
p10
Enable or disable sign in property (Off,
On)
p11
Sign in property number (1 to 8)
Query
SUser[,p1]?
The password of p5 and user ID of p8 are
displayed using asterisks.
Example Register a user-level user to user number 3.
Set the user name to “user10.” Allow login
only using touch operation, and specify user
limitation number 5.
SUser,3,User,Key,’user10’,,On,5
Description
• If p1=1, p2 is fixed to Admin. In addition, you cannot
set p3 to Comm.
• If p2=Admin, p6 and p10 are fixed to Off.
• If p2=Monitor, p6, p9, and p10 are fixed to Off.
• You cannot enter NULL or spaces in p4 or p5.
• Setting to enable password management (SKdc
command)
• If p2=Off, Admin, or User, p5 is invalid. The response
to a query will be blank.
• p9 is fixed to Off.
• You can specify p5 only when p2=Monitor.
When p2=Admin or User, you cannot specify p5
and the default password is enabled. For the default
password, see section 2.3.1, “Logging In“ in the Model
GX10/GX20/GP10/GP20 Advanced Security Function
(/AS) User’s Manual (IM 04L51B01-05EN) or section
2.3.1, “Logging In“ in the Data Acquisition System GM
Advanced Security Function (/AS) User’s Manual (IM
04L55B01-05EN).
• For the characters that you can use in the specified
password (p5), see Appendix 1.
• You cannot use this command to configure settings
when logged in as a user (when the user level is
User).
2.4 Setting Commands
To Next Page
Loading...
Need help?
General
