2-64
IM 04L51B01-17EN
SUserLimit
Authority of User
Sets user operation limitations.
Syntax
SUserLimit,p1,p2,p3
p1
User limitation number (1 to 10)
p2
Authority of user
Memory
Memory
Math
Computations
DataSave
Data save
Message
Message
Batch
Batch
AlarmACK
Alarm ACK
Comm
Communication
DispOpe
Touch operation (cannot be
specified on the GM.)
ChangeSet
Setting operation
DateSet
Date/time settings
File
File operation
System
System operation
Out
Output operation
CalibSet
Calibration correction
settings (valid only when
the advanced security
function (/AS option) is in
use on instruments whose
version is 2.02 or later.)
CtrlIn
Remote/Local operation
(This is valid when a
PID Control Module is
installed.)
CtrlOut
Control operation (same
as above)
Tuning
Tuning operation (same as
above)
LocalSP
SP operation (same as
above)
Program
Program operation (This is
valid when a PID Control
Module is installed and the
program control function (/
PG option) is in use.)
p3
Free/Lock
Free
Not lock
Lock
Lock
Query
SUserLimit[,p1]?
Example Set user limitation number 1 so that changing
settings is prohibited.
SUserLimit,1,ChangeSet,Lock
Description
• You cannot use this command to configure settings
when logged in as a user (when the user level is
User).
SSignIn
Sign In (/AS)
Sets the sign in record for the measured data file.
Syntax
SSignIn,p1,p2,p3
p1
Sign in type (Batch, File)
p2
Sign in at record stop
(GX/GP: On, Off)
(GM: Fixed to Off)
p3
FTP transfer timing
(GX/GP: DataSave, SignIn)
(GM: Fixed to DataSave)
Query
SSignIn?
Example When the recording of measured data of a
batch process is stopped, switch to the screen
for signing in.
SSignIn,Batch,On,Signin
SSignInTitle
Sign In Title (/AS)
Sets the sign in title.
Syntax
SSignInTitle,p1,p2,p3
p1
Sign in 1 title (up to 16 alphanumeric and
symbol characters)
p2
Sign in 2 title (same as above)
p3
Sign in 3 title (same as above)
Query
SSignInTitle?
Example Set the sign in 1, 2, and 3 titles to “Operator 1,”
“Supervisor 1,” and “Manager 1,” respectively.
SSignInTitle, ‘Operator 1’,
‘Supervisor 1’, ‘Manager 1’
SSignInLimit
Sign In Property (/AS)
Sets the sign in property.
Syntax
SSignInLimit,p1,p2,p3,p4
p1
Sign in property number (1 to 8)
p2
Sign in 1 free/lock (Free, Lock)
p3
Sign in 2 free/lock (Free, Lock)
p4
Sign in 3 free/lock (Free, Lock)
Query
SSignInLimit[,p1]?
Example Set a sign in property number 2 to allow the
execution of only sign in 1.
SSignInLimit,1,Free,Lock,Lock
2.4 Setting Commands
To Next Page
Loading...
Need help?
General
