<10. Other Functions>
10-20
IM 11M12A01-04E 11th Edition : Jul. 19, 2017-00
Equipment Setup and Others in Group F
Code Item Tuning Engineering unit Default setting
F01
Equipment setup 0 Oxygen analyzer Not initialized
1 Humidity analyzer
F02
F04
Selection of temperature
units
0 degree C degree C
1 degree F
F05
Selection of pressure units 0 kPa kPa
1 psi
F08 Selection of display items 0 Oxygen concentration Humidity
1 Amount of moisture quantity
2 Mixed ratio
3 Item selected with analog output
F10
Date YY.MM.DD/
HH.MM
F11 Period over which average
values are calculated
1 to 255 hours Hours One hour
F12 Period over which max. and
min. values are monitored
1 to 255 hours Hours 24 hours
F13 Process gas temperature 0 to 3000 °C 300°C
F14 Process gas pressure 0 to 300 kPa abs. 101.33 kPa abs.
F20
F21
F22
F23
F30 Initializing all data
F31 Initializing data in group A
F32 Initializing data in group B
F33 Initializing data in group C
F34 Initializing data in group D
F35 Initializing data in group E
F36 Initializing data in group F
Inspection-related Items in Group G
Code Item Tuning Engineering unit Default setting
G01 mA-output loop 4 to 20 mA 4 mA
G11
Output contact 1 0 Open Open
1 Closed
G12
Output contact 2 0 Open Open
1 Closed
G15 Automatic calibration
solenoid valve (zero)
0 Off Off
1 On
G16 Automatic calibration
solenoid valve (span)
0 Off Off
1 On
G21
Input1 contact 0 Open
1 Closed
G22
Input2 contact 0 Open
1 Closed
G30 Reset
To Next Page
Loading...
Need help?
General
