York YCIV Series - Page 31

JOHNSON CONTROLS
31
SECTION 3 - RIGGING, HANDLING, AND STORAGE
FORM 201.23-NM2
ISSUE DATE: 09/25/2020
3
LIFT POINTS DIMENSIONS TAKEN FROM (NOT ALL POINTS ON UNITS)
2 COMPRESSOR MODELS
60 HZ EFF
#1 #2 #3 #4 #5
INCH METRIC INCH METRIC INCH METRIC INCH METRIC INCH METRIC
0157 HIGH Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 216.7 Y = 5505 --- --- --- ---
0157 STD Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 216.7 Y = 5505 --- --- --- ---
0177 HIGH Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 224.7 Y = 5708 --- --- --- ---
0177 STD Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 216.7 Y = 5505 --- --- --- ---
0187 HIGH Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 224.7 Y = 5708 --- --- --- ---
0187 STD Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 224.7 Y = 5708 --- --- --- ---
0197 HIGH Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 224.7 Y = 5708 --- --- --- ---
0207 STD Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 224.7 Y = 5708 --- --- --- ---
0207 HIGH Y = 33.3 Y = 846 Y = 92.7 Y = 2355 Y = 180.7 Y = 4590 Y = 284.9 Y = 7235 --- ---
0227 HIGH Y = 33.3 Y = 846 Y = 92.7 Y = 2355 Y = 180.7 Y = 4590 Y = 284.9 Y = 7235
0227 STD Y = 33.3 Y = 846 Y = 136.7 Y = 3473 Y = 224.7 Y = 5708 --- --- --- ---
0247 STD Y = 33.3 Y = 846 Y = 92.7 Y = 2355 Y = 180.7 Y = 4590 Y = 284.9 Y = 7235 --- ---
0247 HIGH Y = 33.3 Y = 846 Y = 92.7 Y = 2355 Y = 180.7 Y = 4590 Y = 284.9 Y = 7235 --- ---
0267 STD Y = 33.3 Y = 846 Y = 92.7 Y = 2355 Y = 180.7 Y = 4590 Y = 284.9 Y = 7235 --- ---
3 COMPRESSOR MODELS
60 hz EFF
#1 #2 #3 #4 #5
INCH METRIC INCH METRIC INCH METRIC INCH METRIC INCH METRIC
0267 HIGH Y = 33.2 Y = 843.8 Y = 141.1 Y = 3584.8 Y = 238.6 Y = 6061.3 Y = 357 Y = 9067.4 --- ---
0287 STD Y = 33.2 Y = 843.8 Y = 141.1 Y = 3584.8 Y = 238.6 Y = 6061.3 Y = 357 Y = 9067.4 --- ---
0287 HIGH Y = 33.2 Y = 843.8 Y = 123.7 Y = 3142.2 Y = 216.7 Y = 5504.2 Y = 320.5 Y = 8139.9 Y = 401 Y = 10185
0307 STD Y = 33.2 Y = 843.8 Y = 141.8 Y = 3584.8 Y = 238.6 Y = 6061.3 Y = 357 Y = 9067.4 --- ---
0327 HIGH Y = 33.2 Y = 843.8 Y = 120.7 Y = 3064.9 Y = 216.7 Y = 5504.2 Y = 320.5 Y = 8139.9 Y = 401 Y = 10185
0357 STD Y = 33.2 Y = 843.8 Y = 120.7 Y = 3064.9 Y = 216.7 Y = 5504.2 Y = 320.5 Y = 8139.9 Y = 401 Y = 10185
0357 HIGH Y = 33.2 Y = 843.8 Y = 120.7 Y = 3064.9 Y = 217.8 Y = 5531.5 Y = 328.1 Y = 8334.6 Y = 445 Y = 11302.6
0397 STD Y = 33.2 Y = 843.8 Y = 120.7 Y = 3064.9 Y = 217.8 Y = 5531.5 Y = 328.1 Y = 8334.6 Y = 445 Y = 11302.6
NOTE: Weights and approximate center of gravity location shown for base unit. Any options selected may add weight to the unit and a󰀨ect
the center of gravity. Locate the center of gravity through trial lifts to account for possible variations in unit conguration. Contact your nearest
Johnson Controls Sales O󰀩ce for weight data.
UNIT RIGGING
LD18957
#1
2 COMPRESSOR
3 COMPRESSOR
#2
#3
#4
#1
#2
#3
#4
#5