York YZ MODEL A - Page 167

JOHNSON CONTROLS
167
APPENDIX - MATERIAL SAFETY DATA SHEETS
FORM 161.01-OM1
ISSUE DATE: 6/8/2018
3
Page 3 of 5
Safety Data Sheet
Product: Solid State Starter / VSD Coolant
Storage conditions
Store in a cool, dry, well-
ventilated area away from
incompatible materials. Keep containers closed when not
in use.
Suitable materials of
construction
No information available
Unsuitable materials of
construction
No information available
Eye/face protection
Chemical splash goggles
Skin protection
Chemical-resistant gloves and body-covering clothing
Respiratory protection
Respiratory protection is not normally required. A
respirator is recommended if significant mists, vapors, or
aerosols are generated.
Engineering controls
Adequate ventilation, eye-wash station, and emergency
shower
General hygiene considerations
Do not eat, drink, or smoke while handling this product.
Chemical Name
OSHA PEL
ACGIH TLV
Non-hazardous substances
None established
None established
pH
7.5-8.0
Appearance
Blue, Clear liquid
Odor
Mild
Odor Threshold
No information available
Melting/freezing point
No information available
Initial boiling point/boiling
range
No information available
Flash point
No information available
Evaporation rate
No information available
Flammability (solid, gas)
No information available
Upper/lower flammability or
explosive limits
No information available
Vapor pressure
No information available
Vapor density
No information available
VOC content
No information available
Specific gravity
0.960-1.040
Solubility
Complete
Partition coefficient
n-octanol/water
No information available
Auto-ignition temperature
No information available
Decomposition temperature
No information available
Viscosity
No information available
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES