Page – 140/155 AF6ZP0CA – COMBIAC0 & ACE0 2uC – User Manual
From this form you can define the CAN-device used (IXXAT or IFAK or Peak)
and the CAN communication speed then press the OK button.
Once you have defined the CAN interface, you have to choose which CAN-
device you need to connect to, then choose “Connection” -> “Set Node” menu (or
push the “Set Node” icon).
Once you have chosen the node to which you want to connect, start the
connection and insert the password in order to have the possibility to change the
parameters.
So, choose “Configuration” -> “Enter Password”.
To Next Page
Loading...
Need help?
General
