Need help?Do you have a question about the Zebra 105Se and is the answer not in the manual?
General| Print Resolution | 203 dpi |
|---|---|
| Print Method | Thermal transfer |
| Maximum Print Width | 4.09 inches (104 mm) |
| Maximum Print Length | 39" (991 mm) |
| Media Width | 1" (25.4 mm) to 4.5" (114 mm) |
| Connectivity | RS-232, Parallel |
| Operating Temperature | 40° F (5° C) to 105° F (40° C) |
| Power Requirements | 115V or 230V |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
| Humidity | 20% to 85% non-condensing |
| Media Thickness | 0.0025 to 0.008 inches (0.06 to 0.2 mm) |
Statement regarding the proprietary nature of the manual's content.
Policy on continuous improvement of products and documentation.
Statements regarding compliance with FCC and Canadian DOC regulations.
Disclaimers of liability and copyright information.
Introduces the guide, printer functions, and additional documentation.
Details communication, print mechanism, and media transport capabilities.
Lists system needs, media/ribbon requirements, and specifications.
Covers safety, technical specs, and available options/accessories.
Procedures for unpacking, inspecting for damage, and reporting issues.
Details on connecting power, voltage selection, and fuse replacement.
Step-by-step guides for loading ribbon and media, including modes.
Steps to perform after loading ribbon and media before operation.
Explains printer modes, media sensing, and transport modes.
Details the functions of front panel keys and indicator lights.
Guides on performing various self-tests for diagnosis and settings.
Provides sample ZPL II formats for creating labels.
Describes DIP switches for configuration and overriding ZPL II commands.
Allows fine-tuning of printer settings like darkness and position.
Automated process to set media/ribbon parameters for accurate printing.
Overview of printer-host connections and communication codes.
Details RS-232 connections, pinouts, signals, and cabling.
Describes parallel interface data transmission and cabling requirements.
Details the function of each pin in the parallel connector.
Guides for cleaning printer exterior, interior, printhead, sensors, and cutter.
Information on printer lubrication, recommending professional service.
Procedures for adjusting toggle position and printhead pressure.
Steps to adjust transmissive media sensor positions.
Procedure to adjust media and ribbon sensor sensitivity.
Comprehensive charts to diagnose and resolve common printer faults.
Describes Peel-Off, Cutter Module, and Media Rewind options.
Covers Fanfold Supply Bin, ZebraNet, Black Mark Sensor, and memory expansion.
Details optional printhead densities and available character fonts.
Specifications for obtaining a 230 VAC power cord if not supplied.
A chart listing ASCII characters and their corresponding hexadecimal values.
Method for adjusting print darkness to ensure 'in-spec' bar codes.
Lists available scalable and bitmap fonts, including styles and sizes.
Definitions of terms related to printer operation, media, and printing.
Definitions for terms like calibration, printhead wear, ribbon, and void.
Index entries covering printer operation, installation, and controls.
Index entries for technical specifications, maintenance, and options.
Index entries for configuration, troubleshooting, and appendices.
To Next Page
