Zebra WT6000 Series User Manual

DataWedge Configuration
107
Function Prototype
Parameters
action: String "com.symbol.datawedge.api.ENUMERATE_SCANNERS"
Return Values
The enumerated list of scanners will be returned via a broadcast Intent. The broadcast Intent action is
"com.symbol.datawedge.api.ACTION_ENUMERATEDSCANNERLIST" and the list of scanners is returned as a
string array (see the example below).
Error and debug messages will be logged to the Android logging system which then can be viewed and filtered by
the logcat command. You can use logcat from an ADB shell to view the log messages, e.g.
Error messages will be logged for invalid actions and parameters
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.ENUMERATE_SCANNERS", "");
$ adb logcat -s DWAPI

Zebra WT6000 Series Specifications

General

Storage	4 GB Flash
NFC	No
Audio	Built-in speaker and microphone
Operating Temp	-4°F to 122°F (-20°C to 50°C)
Connectivity	802.11a/b/g/n
Durability	IP65
Drop Spec	Multiple 4 ft./1.2 m drops to concrete
Operating System	Android™ 5.1 (Lollipop) with Mobility Extensions (Mx)