Accessories
38
5-Slot WT6000 Ethernet Cradle
The 5-Slot WT6000 Ethernet Cradle:
• Provides 5.4 VDC (nominal) power for operating the WT6000.
• Connects up to five WT6000 devices to an Ethernet network.
• Simultaneously charges up to five WT6000 devices.
• Simultaneously charges up to five spare batteries.
Figure 28 5-Slot WT6000 Ethernet Cradle Setup
Charging the WT6000
To charge the WT6000:
1. If charging a WT6000 with a standard battery, insert either end of the WT6000 into the WT6000 charging slot.
NOTE: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 154.
AC Line Cord
Power Supply
Ethernet Cable
DC Line Cord
Power Port
Primary Ethernet Port
Ethernet
Switch
To Next Page
Loading...