Zebra WT6000 Series User Manual

Accessories
28
Figure 13 Insert WT6000 into Cradle
2. If charging a WT6000 with a extended battery, insert the end of the WT6000 into the WT6000 charging slot as
shown below.
Figure 14 Insert WT6000 with Extended Battery into Cradle
3. Ensure the WT6000 is seated properly. The WT6000 Charging LED blinks indicating charging.
Charging the RS6000
To Charge the RS6000:
1. Insert the RS6000 in the RS6000 charging slot.

Zebra WT6000 Series Specifications

General

Storage	4 GB Flash
NFC	No
Audio	Built-in speaker and microphone
Operating Temp	-4°F to 122°F (-20°C to 50°C)
Connectivity	802.11a/b/g/n
Durability	IP65
Drop Spec	Multiple 4 ft./1.2 m drops to concrete
Operating System	Android™ 5.1 (Lollipop) with Mobility Extensions (Mx)