EasyManua.ls Logo

Zebra WT6000 Series - Battery Charging

Zebra WT6000 Series
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories
32
Figure 19 Insert Battery into Cradle
Figure 20 Insert Extended Battery into Cradle
3. Ensure the battery is seated properly. The Spare Battery Charging LED blinks indicating charging.
Battery Charging
The WT6000 Charging LED indicates the status of the battery charging in the device. The Spare Battery Charging
LED indicates the status of the spare battery charging. See Table 5 on page 26. The standard 3,350 mAh battery
fully charges in less than four hours at room temperature. The extended 5,000 mAh battery fully charges in
approximately five hours and 30 minutes at room temperature.
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The battery charger always performs battery
charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F)) the battery
charger may for small periods of time alternately enable and disable battery charging to keep the battery at
acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures
via its LED.

Table of Contents

Related product manuals