Wireless
67
5. Locate the WT6000 as a portable device.
6. Open the Internal storage folder.
7. Copy files to and from the WT6000 or delete files as required.
Transferring Files using Photo Transfer Protocol
8. Connect the Rugged Charge/USB Cable to the WT6000 or place the WT6000 into the 1-Slot Charging Cradle,
or 2-Slot Charging Cradle. See Accessories for setup information.
9. Pull down the Notification panel and touch USB charging this device.
10. Touch Transfer photos (PTP).
11. On the host computer, open a file explorer application.
12. Open the Internal storage folder.
13. Copy or delete photos as required.
Disconnect from the Host Computer
14. On the host computer, unmount the device.
15. Remove the USB/Charge Cable from the device or remove the device from the cradle.
NOTE: Use Photo Transfer Protocol (PTP) to copy photos from either the microSD card or internal memory to
the host computer.
CAUTION:Carefully follow the host computer’s instructions to unmount the device and disconnect USB devices
correctly to avoid losing information.
To Next Page
Loading...