EasyManuals Logo

Zebra WT6000 Series User Manual

Zebra WT6000 Series
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
DataWedge Configuration
77
Decoder Params
Use Decode Params to configure individual decoder parameters.
Codabar
Length1 - Use to set decode lengths (default - 6). See Decode Lengths on page 82 for more information.
Length2 - Use to set decode lengths (default - 55). See Decode Lengths on page 82 for more information.
CLSI Editing - Enable this parameter to strip the start and stop characters and insert a space after the
first, fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system
requires this data format (default - disabled).
NOTIS Editing - Enable this parameter to strip the start and stop characters from a decoded Codabar
symbol. Enable this feature if the host system requires this data format (default - disabled).
Redundancy - Sets the reader to read the bar code twice before accepting data. A check in the checkbox
indicates that redundancy is enabled (default - enabled).
Code 11
Length1 - Use to set decode lengths (default - 4). See Decode Lengths on page 82 for more information.
Length2 - Use to set decode lengths (default - 55). See Decode Lengths on page 82 for more information.
Redundancy - Sets the reader to read the bar code twice before accepting data. A check in the checkbox
indicates that redundancy is enabled (default - enabled).
Report Check Digit - Transmit Code 11 data with or without the check digit. A check in the checkbox
indicates to send Code 11 data with check digit (default - disabled).
MSI Disabled Disabled Disabled Disabled Disabled
PDF417 Enabled Enabled Enabled Enabled Enabled
QRCode Enabled N/A Enabled Enabled Enabled
TLC39 Disabled Disabled Disabled Disabled Disabled
Trioptic 39 Disabled Disabled Disabled Disabled Disabled
UK Postal Disabled N/A Disabled Disabled Disabled
UPCA Enabled Enabled Enabled Enabled Enabled
UPCE0 Enabled Enabled Enabled Enabled Enabled
UPCE1 Disabled Disabled Disabled Disabled Disabled
US4state N/A N/A Disabled Disabled Disabled
US4state FCIS N/A N/A Disabled Disabled Disabled
US Planet Disabled N/A Disabled Disabled Disabled
US Postnet Disabled N/A Disabled Disabled Disabled
Table 8 Supported Decoders (Continued)
Symbology RS507 RS4000 RS5000 RS6000 DS3678

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra WT6000 Series and is the answer not in the manual?

Zebra WT6000 Series Specifications

General IconGeneral
Storage4 GB Flash
NFCNo
AudioBuilt-in speaker and microphone
Operating Temp-4°F to 122°F (-20°C to 50°C)
Connectivity802.11a/b/g/n
DurabilityIP65
Drop SpecMultiple 4 ft./1.2 m drops to concrete
Operating SystemAndroid™ 5.1 (Lollipop) with Mobility Extensions (Mx)

Related product manuals