Routine Maintenance
Cleaning Procedures
106
79695L-002 Rev. A Z Series
®
/RZ™ Series User Guide 6/6/08
4. While manually rotating the platen roller, clean it thoroughly with the swab. Allow the
solvent to evaporate.
5. Reload media and ribbon, and close the printhead assembly.
Note • If performing this procedure does not improve print quality, try cleaning the
printhead with Save-A-Printhead cleaning film. This specially coated material removes
contamination buildup without damaging the printhead. Call your authorized Zebra
reseller for more information.
To Next Page
Loading...