Zebra Z Series User Manual

39
Operations
Print Modes and Printer Options
6/6/08 Z Series
®
/RZ™ Series User Guide 79695L-002 Rev. A
Media Paths
Table 9 shows the media paths for print mode and printer option combinations using roll
media. Fanfold media uses the same print modes and printer options as roll media. RFID
printers can use all of these printer options and have the same media paths.
Table 9 • Media Paths for Print Modes with Various Printer Options
Print Mode Printer Option
Media Path
Tear-Off Printers with any
printer options can
use Tear-Off mode
Peel-Off Peel, Liner take-up,
or Rewind
Peel-Off (with Liner
Take-Up)
Liner take-up
Rewind
Red solid lines = media, Blue dotted lines = backing only

Zebra Z Series Specifications

General

Print Method	Thermal Transfer or Direct Thermal
Max Print Width	4.09 in./104 mm (depending on model)
Max Print Length	39 in./991 mm (with 203 dpi)
Connectivity	USB, Serial (depending on model)
Supported Media Types	Wristbands
Media Width	1.0 inch (25.4 mm)
Operating Temperature	40°F to 104°F (5°C to 40°C)
Storage Temperature	-40° F/-40° C to 140° F/60° C
Resolution	203 dpi or 300 dpi (depending on model)