Zebra Z Series User Manual

147
Specifications
Printer Options
6/6/08 Z Series
®
/RZ™ Series User Guide 79695L-002 Rev. A
Printer Options
Option ZM400 ZM600 RZ400 RZ600
Cutter XXXX
Peel-off XXXX
Liner take-up X Not
available
XNot
available
Alternate Thermal Transfer option
(gray spindle), which uses ribbon coated on
the inside
XNot
available
XNot
available
Factory-installed 64 MB (58 MB user
available) Flash memory
XXXX
300 dpi printhead X X X X
600 dpi printhead X Not
available
Not
available
Not
available
Rewind XXXX
External print server (10/100 or 10base-T) X X X X
Internal print server (10base-T) X X X X
Wireless print server X X X X
RFID reader/encoder Optional Optional Standard Standard

Zebra Z Series Specifications

General

Print Method	Thermal Transfer or Direct Thermal
Max Print Width	4.09 in./104 mm (depending on model)
Max Print Length	39 in./991 mm (with 203 dpi)
Connectivity	USB, Serial (depending on model)
Supported Media Types	Wristbands
Media Width	1.0 inch (25.4 mm)
Operating Temperature	40°F to 104°F (5°C to 40°C)
Storage Temperature	-40° F/-40° C to 140° F/60° C
Resolution	203 dpi or 300 dpi (depending on model)