29
Printer Setup
Select a Data Communication Interface
6/6/08 Z Series
®
/RZ™ Series User Guide 79695L-002 Rev. A
Table 6 • Connecting the Printer to a Computer or Network
Interface Connection and Configuration
RS-232 Serial The baud rate, number of data and stop bits, the parity, and the
XON/XOFF or DTR control must match those of the host computer. See
Standard Control Panel Parameters on page 69 to view or change these
parameters.
IEEE 1284
Bidirectional
Parallel
No additional configuration is necessary.
To Next Page
Loading...