Zeiss Axiostar plus - Instrument Description; Eyepieces

Instrument description
Axiostar plus Technical Data Carl Zeiss
40-815 e 12/01 1-13
(7) Opto-mechanical data
Stand with stage focusing........................................................................with coarse drive
2
(4 mm/U)
and fine drive (0.4 mm/U)
overall lift 15 mm
Objective change...............................................................manually via 4/5-position objective revolver
Objectives ..............................................................................ICS line of objectives with W 0.8 thread
Eyepieces ...................................................................................................... 30 mm plug-in diameter
with field number 18.................................................. PL 10×/18 Br. and PL 10×/18 Br. foc. or
with field number 20................................................E- PL 10×/20 Br. and E- PL 10×/20 Br. foc.
Specimen stage ..................................................... mechanical stage 75 × 30 R/L with ceramic surface
Dimensions (width × depth).............................................................................. 170 × 140 mm
Travel range (width × depth) ................................................................................ 75 × 30 mm
Coaxial drive ..........................................................................................right or left selectable
Vernier............................................................................................... readable from the right
Specimen holder ..............................................................................with spring clip to the left
Abbe-condenser 0.9/1.25 .............................for V
Obj.
< 4× with wide angle function 445312-0000-000
Binocular tube 45°/20
maximum field number .......................................................................................................20
interpupillary distance ........................................................can be set between 55 and 75 mm
viewing angle.................................................................................................................... 45°
viewing height ................................................................................................. 425 − 470 mm
visual port......................................................................................................... tube factor 1×
Binocular phototube 45°/20
maximum field number .......................................................................................................20
interpupillary distance ........................................................can be set between 55 and 75 mm
viewing angle.................................................................................................................... 45°
viewing height ................................................................................................. 425 − 470 mm
visual port......................................................................................................... tube factor 1×
camera/video port ............................................................................................ tube factor 1×
camera/video port ..........................................................................................interface 60 mm
switched via folding prism ......................................................................100% vis / 100% doc
2
The scale on the coarse drive (0 to 400) permits the orienting measurement of the object thickness:
1 increment corresponds to approx. 5 µm
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com